Sea-Dog SD Cable Outlet

Manufacturer: Sea-Dog
Manufacturer Part No: SD Cable
MSRP: 8.99

The Sea Dog Cable Outlet is a good plug to use to power your 12 volt electronics. I use them for powering my fish finders. I recommend using dielectric grease on the brass connections, and 16-18AWG stranded wire. I also recommend applying a coat of Goop or Lexell to seal the plug to the hull of the kayak the ensure no water enters the hull, and when tightening the screws that secure the wires, use a small philips bit, and use only fingers to tighten. I have found when trying to tighten with a small screw driver I’ve stripped the heads of the screws. I’ve installed 4 and had one strip the heads of the screws, and one the cap wouldn’t stay closed very well. When making the hole to inset the plug cut the hole as small as possible and keep all your scrap plastic.

Pros:

  • Easy to use
  • Convenient

Cons:

  • Screws are weak

HTML Snippets Powered By : XYZScripts.com
Close